Target's Ultima-WR Stain System is built upon a unique hybridized linseed oil emulsion base and organic colorants that allow this stain to be thinned, and cleaned with water, while still providing the deep, rich color penetration of traditional linseed oil.
No turpentine, mineral spirits or ammonia is required for thinning this material. Ultima-WR Stains clean up with basic water and mild detergent.
Ultima-WR Stains penetrate deeply into the grain pattern, allowing for a color reaction and definition that is identical to historically correct linseed based stains. These linseed emulsions allow for the stain to remain open longer to prevent lap marks during wiping operations.
Ultima-WR Stains will generate all of the color richness of solvent-based stains, but with the safety and convenience of a water-based system.
The Ultima-WR Clear Base (WR400xx) can be used as a "Danish-Oil" type finish, bringing out the natural color tones of domestic and exotic woods without the introduction of dyes or pigments. Again, due to the emulsified linseed oil backbone, the Clear Base will cure and age to a soft amber tone, identical to linseed oil in turpentine but without the flammability or combustibility issues inherent in the older blends. Ultima-WR Stains are blended with UV absorbers and reflectors, so that the colors remain vivid and true when exposed to UV light. - Low VOC, Zero HAPS
- Dye Based Colorants
- Can be intermixed for custom colors
- Can be further tinted with ColorFX Dyes
- Ultima WR Clear Base is useful as a pre-stain conditioner to help eliminate blotching
- Ready to topcoat in 2 hours.
- Can be hand applied by wiping or spray applied and wiped.
- Non-Flammable
- Excellent Shelf-Life (24+ Months)
- Clean-Up with Water
|