Wood Essence
Canadian Suppliers of Specialty
Wood Finishing Products


Use the button below to subscribe to "Wood Essence News"

HSF5100 Grain Filler
Other products by Target Coatings

0.95 litre (Quart)Neutral
$28.00Add to CartAdd to Wishlist
DescriptionShipping SpecsReviews (1)

Target Coatings HSF5100 High Solids Filler


Target Coatings HSF5100 is a high solids, thermoset urethane grain filler formulated for application by trowel, brush or spray.

Specifically engineered to provide a smooth, non-textured appearance on open grained woods like Oak, Ash, Walnut, Mahogany, etc.

Supplied as a neutral colored (tan-putty color) filler that can be used directly on light colored woods.   Filler can be tinted to suit darker woods as required and to prevent a "grey" color in the open grain. Apply filler directly over bare wood if desired or over pre-stained, sealed surfaces.

Brush and wipe filler into grain/pores and allow to set for 5 to 10 minutes. Squeegee off excess and allow to dry for 2 hours. Level sand with 400 grit paper and re-apply filler if required or proceed to remainder of finishing schedule.

The fast drying nature of this system allows topcoats to be applied in as little as 2 hours of initial dry-to-touch time with any water-based topcoat finishing system.


  • Low VOC
  • Water Clean-Up
  • Non-Flammable
  • Supplied as Neutral (tan-putty, NOT transparent) color
  • Tintable with ColorFX Dyes, Mixol Pigments or UTCs to create matching or contrasting grain patterns
  • Spray, Brush or Wipe on

Target Coatings HSF5100 High Solids Filler & Glaze

Click Below for Product Data:





More Items in Grain Fillers

Your Cart


Top Sellers

Brite Tone Grain Filler

Brite Tone Grain Filler
Price: $28.00

More Details

HSF5100 Grain Filler

HSF5100 Grain Filler
Price: $28.00

More Details

Clear Coat

Clear Coat
SKU:  ST0600K
Price: $52.00

More Details

Email A Friend

Send this product to a friend...