Name: General Finishes Chalk Style Paint - 946ml (Quart - 32oz)
Brand: General Finishes
SKU: GFCSP-Q
Price: 32.75 CAD

General Finishes Chalk Style Paint

Chalk Style Paint is a casual chalky interior matte paint in 20 contemporary colors.

This new palette complements General Finishes' lively Milk Paint line with colors inspired by relaxed Scandinavian hues, British tradition and American favorites.

Chalk Style Paint and General Finishes Milk Paints can be layered with each other for special effects. They can also be mixed together for custom colors (use inter-mixed product immediately).

Frequently used in re-purposing furniture or as one of the elements in developing distressed finishes. It can be layered with different colors or combined with General Finishes Glazes for stunning special effects.

Further protection can be added by applying General Finishes High Performance or Clear Polyurethane over top.

Apply by brush, pad applicator or spray
Choose from 20 Pre-Mixed ready to use colors.
Water Cleanup
Low VOCs
Coverage: 100 ft2/quart or 9.8 m2/liter.
Wet distressible for 12 hours.
Use for distressed or glazed special effects finishes
Enhance protection with General Finishes clear topcoats like High Performance or Flat-Out-Flat.
Available in Pints & Quarts


Click Below for Product Data:
Technical Specifications
MSDS Sheet

General Finishes Chalk Style Paint Colors

Colors may not be exact on all monitors. Test colors on scrap prior to application to projects.

projects.

Chalk White	Bone White	French Vanilla	Chapin Gray
Limestone	Empire Gray	Slate Gray	Black Pepper
Bayberry Green	Nantucket Green	Key West Blue	Summertime Blue
Stillwater Blue	Charleton Blue	Fjord Blue	Midnight Blue
Moroccan Yellow	Apricot	Cardamom Brown	Rembrandt Red

SURFACE PREPARATION:

EXISTING FINISHES: Clean using scotch brite pad and a 50|50 mix of denatured alcohol and water. Buff lightly with a 220 sanding pad and remove dust with oil free tack cloth.

RAW WOOD: Sand with the grain using #120 grit followed by #220-grit paper. Remove dust with oil free tack cloth. APPLICATION:

Stir well prior to use.

Apply LIBERALLY with a foam brush, bristle brush, paint pad applicator or foam roller.

SPRAYING: Can be sprayed through compressed air, HVLP, airless or C.A.S. units. Fluid tip sizes should be as follows: Compressed air - .050, HVLP - .072, Airless - .013. Use medium size air caps. Check with you equipment supplier for proper tip sizes. If thinning is needed, add 5% -10 water.

Lightly buff between coats with extra-fine sanding pad or 220 grit (or higher) sandpaper. Remove dust with an oil free tack cloth.

2-3 coats are recommended.

DRY TIME: 2-4 hours under ideal conditions (70 degrees F or 21 C, 70% humidity). Cooler temperatures and higher humidity will prolong dry time up to 10 hours.

THINNING: Thin with 5-15% GF Extender or water.

TOPCOATS: For more durability, Chalk Style Paint can be topcoated with water based GF High Performance, GF Flat Out Flat, or Enduro Professional topcoats. Topcoating is highly recommended in high use areas such as table tops and cabinets. It is not required for low use items such as a book shelf. Also use a topcoat if you want a smoother surface because it is a more textural finish than Milk Paint. Because Chalk Style Paint is more porous, the first layer of topcoat will be rougher than it is over Milk Paint. Oil topcoats may be used after a 24 hour dry time, but they will amber over light colors.

CLEANUP: Warm, soapy water.

COVERAGE: 100 ft2/quart or 9.8 m2/liter.

STORAGE: Keep from freezing. Avoid storing paint in temperatures above 80F.

VOC: Less than 150 grams per liter.