Bartley Fillers are a particle filler that provides fast filling and minimal shrinkage after curing.
Grain fillers are intended to provide a smooth, texture free, finish on open grain woods such as Walnut, Mahogany, Oak, Ash, etc. Choose from Natural, Light or Dark. Brush and wipe filler into grain/pores and allow to set for 5 to 10 minutes. Squeegee off excess and allow to dry for minimum 2 hours. Level sand with 400 grit paper and re-apply filler if required or proceed to remainder of finishing schedule.
Bartley fillers can be tinted with UTCs, Mixol Pigments or ColorFX Dye Concentrates, but due to the initial color of the filler, results from tinting may not be predictable. Test your colors on small quantities first. Because filler is intended to be in the pores of the wood only, a little goes a long way. 1/2 pint is enough for a guitar body and one pint is enough for a small dining table top. - Particle / Oil-based Filler
- Fast fill, sometimes with a single application, although frequently multiple applications are necessary.
- Cures hard.
- Tintable with ColorFX Dyes, Mixol Pigments or UTCs to create matching or contrasting grain patterns.
- Apply by rag / squeegee.
- Compatible under waterbased finishes when fully cured
| Please Note:
1/2 Pint Size is OUT of STOCK... 1 Pint Size is OUT of STOCK... 1 Quart Size is OUT of STOCK... Unfortunately, we do not know when we will be able to obtain this material again... |